Skip to content
![Pipe by Vessel [Gunmetal] - Headshop.com](http://www.headshop.com/cdn/shop/files/76cd9387-8d22-4015-bd12-46bbbcef263a_{width}x.jpg?v=1682452995)
![Pipe by Vessel [Gunmetal] - Headshop.com](http://www.headshop.com/cdn/shop/files/57468aee-c849-45b9-9000-ec1eaa3e3910_{width}x.jpg?v=1682452997)
![Vessel Core [Soleil] - Headshop.com](http://www.headshop.com/cdn/shop/files/056af6f5-2fd9-43be-9a9d-9caf24601c5b_{width}x.jpg?v=1692121251)
Hohm Mega 18650 Rechargeable Batteries 2 qty
Hohm Mega 18650 Rechargeable Batteries 2 qty
The Hohm MEGA batteries incorporate all of the standard external features that Hohm Tech is known for, while also utilizing advanced technology. This rechargeable battery is perfect for those looking for a cost-effective option without compromising on performance or dependability. We are excited to introduce the Hohm MEGA, which features an anti-counterfeit top cap and follows ANSI+ATD approved labeling and packaging standards. It also utilizes DSP chemistry to extend its cycle life beyond the industry-standard QSP formula.
-
Pack Size: Two (2) Batteries
- Capacity: 2505mAh
- Max Charge Current: 29.5V
-
Continuous Discharge Rate: 22A
- Energy Density (wt.): 193.3 Wh/kg
- Energy Density (vol.): 544.7 Wh/l
- Cycle Life Retention: 500 Cycles (77%)
- Chemistry Type: DSP Li-NMC
According to Indonesia Chemistry, these batteries have a capacity of 2505mAh and a CDR of 22A. They also have a 3.2V cut-off limit at 80°C or after 29.5A usage (whichever comes first). The MEGA cell is ideal for EV and DC motor applications, able to withstand repeated 37.6A loads for 5 seconds on and 30 seconds off (Surge/Pulse). All ratings are carefully measured and tested to meet or exceed strict limitations for DLr1, TID2, PVDL3, CLR4, mΩR5, and temperature (°C). The Hohm MEGA is constructed using the advanced DSP NMC chemistry formula, with additional levels of cobalt, nickel, and custom bonding agents. It also features top-quality components from leading manufacturers, making it a top performer from Hohm Tech.
Labeling and packaging are both equipped with information that exceeds ANSI + ATD standards, regulations, and compliance. 100% Hohm Tech, 0% nonsense.
Hohm Tech cells are extensively tested and certified by accredited laboratories and regulatory bodies, including UN38.3, EN62133, IEC62133 2nd Edition, and UL1642. Our dedication to delivering top-notch quality is evident through independent certifications such as MSDS, CE, ROHS, UN38.3, IEC, PSE, Specifications, and Air/Sea Transport. Our products consistently offer superior performance, capacity, and safety without any compromises.
To expound on safety:
- modified cathode tag consisting of higher purity aluminum is utilized to aid in lowering internal resistance
- updated poly seal with refined bitumen is installed in every cell to ensure excess pressure is controlled
* NOTICE: Hohm Tech does not manufacture batteries. These are licensed and made specific to the requirements set forth.
** CAN BE CHARGED AT 4.14A. This is not a misprint. 4.14A as in FOUR POINT ONE FOUR-amp charging is possible, tested, proven, and approved within all strict safety protocols set by Indonesia Chemistry.
*** TESTING BEYOND TEMPERATURE. Hohm Tech cells utilize both static & dynamic testing that includes but not limited to: density loss, thermal distribution, volt drop limiters, cycle life retention, and temperature. These tests are imperative to achieve true cell performance, longevity, and overall quality.
- Thermal Image Distribution
- Pulse Voltage Drop Limitation
- Cycle Life Retention
- Resistance Retentivity Pre|Post
- Pulse & Peak is applicable to Dynamic EV Systems ONLY and rated @ ≤5 SEC ON / ≥30 SEC OFF
WARNING: LI-ION CELLS HAVE INHERENT RISKS IF MISUSED OR MISHANDLED. CELL CAN EXPLODE CAUSING SEVERE BURN INJURY, FATALITY, AND PROPERTY DAMAGE. – READ BELOW THOROUGHLY –
READ BROCHURE HERE
CELL= BATTERY
- KEEP OUT OF REACH of anyone under 18 years of age, AND pets.
- DO NOT PUT IN FIRE, oven, microwave, or expose to anything over 100oC (212oF)
- DO NOT CARRY or store OUTSIDE of its protective packaging or a PROTECTIVE CELL CASE.
- DO NOT PUT IN POCKET, bag, purse, or anywhere WITH METAL OBJECTS including COINS and KEYS. Otherwise, cell(s) could short-circuit and explode.
- DO NOT PUT A DEVICE WITH CELL(S) INSTALLED IN POCKET or ON YOUR BODY. As unlikely as it may be, a device can malfunction, have a defect, internal damage, and/or be affected by conductive debris or object(s) in pocket that can overload or short-circuit cell causing it to explode.
- DO NOT USE IN A DEVICE THAT CAN EXCEED MAX CELL WATTAGE (W) or AMPERAGE (A) (listed on each cell and retail packaging). Otherwise, this can overload a cell, causing it to explode.
- DO NOT USE A LOWER RESISTANCE (Ω) # (listed on each cell and retail packaging). Otherwise, this can overload cell, causing it to explode.
- DO NOT USE CELL WITH ANY DAMAGE TO ITS STRUCTURE OR OUTER PROTECTIVE LABEL (also called “WRAP”, “sleeve”, “skin”). Damage may include: dent(s), tear(s), nick(s), puncture(s), corrosion, or any other undisclosed abnormalities or damages. Otherwise, a cell can short-circuit and explode. ALWAYS INSPECT cell VISUALLY and by TOUCH to SEE/FEEL for damage BEFORE EACH USE. ** SEE ILLUSTRATION BELOW AS GUIDELINE. **
- DO NOT LEAVE UNATTENDED WHILE CHARGING, & REMOVE CELL(s) FROM CHARGER ONCE FULLY CHARGED to ensure it is not exposed to any potential charger malfunction such as overcharging which could damage cell causing it to explode.
- DO NOT CHARGE HIGHER THAN MAX CHARGE VOLTAGE (V) (typically 4.2V) or DISCHARGE BELOW MAX VOLTAGE CUT-OFF (V) (typically 2.5V). Overcharging or over-discharging cell(s) can cause irreversible damage and cause it to explode.
- DO NOT MIX WITH USED or DIFFERENT BATTERY TYPES. Differences in cell capacity can lead to one or more cell(s) being overcharged or over-discharged.
- IF USING A MULTI-CELL DEVICE, the device MUST HAVE A NON-CONDUCTIVE BARRIER (typically plastic) OR FITMENT that PREVENTS CELL(S) from TOUCHING THE SIDE(S) OF ONE ANOTHER OR ANY ADJACENT METAL except for the very center of top and bottom of the cell. Otherwise, cell(s) could short-circuit and explode.
- ALWAYS use, connect, charge, and operate cell(s) within their capabilities as listed on each cell, packaging, and product detail pages, while adhering to the device’s user manual.
- COMPLETELY READ and follow the WARNING section listed on each cell, packaging, and here, in its entirety.
- SEARCH www.YouTube.com for “18650 EXPLOSIONS” to understand the importance of consistently taking safety precautions and using Li-ion cells properly. Hohm Tech advocates recycling and replacing any damaged Li-ion cell/battery. As a tool to find your LOCAL RECYCLE CENTER. Or visit Hohm Tech Warranty Center for recycling and replacement. Your safety is #1.
Recommendations For You
More from 420 Sale
Recently viewed
